Looking for a high-quality recycling or waste cart for your customers?
The SSI SCHAEFER USD-M cart is the perfect residential waste and recycling cart.
Use with standard semi automated tippers or automated grabbers, and allow your clients to push waste easily to the curb.
Manufactured in Charlotte, NC and Lodi, CA.
BODY / BAR
- Non-slip, textured finish on corners for grabber traction
- Injection molded for maximum strength and durability
- One-piece high-density polyethylene (HDPE) construction
- Built-in flexibility
- Reinforced wall thickness in critical wear areas for durability
- Externally housed lift bar for water-tight leak-proof body*
- Rotating retention bar for less stress on cart body
- Highly durable, in-molded bar supports
UPPER ATTACHMENT
- Integrated, reinforced upper attachment for semi-automated lifters
- Meets all ANSI standards
LIDS / HANDLES
- Solid lid axle with a robust 3-point attachment
- Overlapping lid design with integral moisture barrier lip
- Inside dripping rim to seal in odors
- 270° lid opening
- Ergonomically designed hand grips for easy push and pull motion
- Smooth surface with no protrusions
- Two ergonomic lift handles for easy opening
WHEELS & AXLES
- 3/4″ solid wheel axle of tempered, rolled, and Zinc Chromate steel
- Quick release durable HDPE wheel for ease of disassembly and easy rolling motion
- Lubricated maintenance-free bearings
- Rubber wheels are optional
BOTTOM
- Angled bottom for easy tilting
- Dual 3/8″ wear strip for longer life
Specifications
| Order # | USD 95M | USD 65M | |
| 1 | Total Height | 44.3" | 41.5" |
| 2 | Body Height | 41.6" | 39.1" |
| 3 | Width | 27.6" | 24.4" |
| 4 | Depth | 31.5" | 27.5" |
| 5 | Wheel Diameter | 10" or 12" | 10" or 12" |
| Load Rating | 335 lbs. | 230 lbs. | |
| Truckload Quantity | 549 | 847 |
ANSI Z245.30 and ANSI Z245.60 Approved. ISO 9001 Certified. Truckload quantity based on 53’ trailer. Measurements in inches.
COLORS, MARKINGS, & OPTIONS
- Available in an array of standard colors. Custom colors available upon request with minimum quantities.
- Smooth surface for hot stamping on lid and body
- Customizable in-mold labeling (IML) on lid
